Shipping Now!

Camera install - Mirrored Image and Guidelines

There are a few different camera models we use depending on availability.  All cameras are the same quality and have the same functionality.  Below are the types of cameras and how to operate each:

Cameras A:

 

 

 

The camera will have two wire loops on the camera wire, Green and White.  Cutting the wires will do the following:

Green - Toggle Distance Lines

White - Mirror Image

 

 

Camera B:

The camera will have two wire loops on the camera wire, Green and White.  Cutting the wires will do the following:

Green - Mirror Image

White - Toggle Distance Lines

12 comments

  • Did front install on my 2016 Tacoma with camera A. Everything fine, except mirrored, cut the white wire and lost lines, cut the green wire and camera is still mirrored. How can I correct this?

    Rich Goldsmith
  • Installed it after a couple of hours on my TRD Pro grille with TSS with no issues (even though the camera seems to hang in front of the TSS sensor). Pretty useful but wish the wires were a bit longer. Also soldering or crimping experience will be pretty useful – don’t want anything coming loose now.

    Erik K.
  • Need help on blue and grey wire. Got 2018 toyota tundra crewmax. Don’t know where to connect this wire. I don’t wanna use the battery coz want this part time only when vehicle is off. Do u know where could i wire up this illumination switch.

    Norman
  • Need help on blue and grey wire. Got 2018 toyota tundra crewmax. Don’t know where to connect this wire. I don’t wanna use the battery coz want this part time only when vehicle is off. Do u know where could i wire up this illumination switch.

    Norman Estrellado
  • Is there a way to eliminate the light at the camera?

    Nathan Sharpe

Leave a comment